Retail shopping center entry with slip-resistant tile coating and foot traffic

Finally—Non-Slip Entrances, Retail Zones & Shared Bathrooms That Pass Every Audit.

CSIRO-Certified. Audit-Ready. Installed Overnight by Australia’s Retail & Franchise Safety Experts.

Not sure what you need?

Give us a call at 1300 987 095.

Trusted by Coles, Lendlease & National Retail Chains After-Hours Installs. Zero Trade Disruption. CSIRO Certified: Meets AS 4586 P3 | P4 | P5 Ratings

Trusted by Australia's Leading Retailers, Operators & Facility Managers

Lendlease Logo
Stockland Logo
Mirvac Logo
Coles Logo
JLL Logo
Colliers Logo
Nando's Logo
Ford Logo
Wet grocery floor before anti-slip coating application

How Australia’s Top Retailers Eliminated Slip Risks—Without Shutting the Doors

From high-traffic supermarket entries to slippery fridge aisles and food court bathrooms, Stellmann has helped brands like Coles, Lendlease, Stockland, and Nando’s eliminate safety risks—without interrupting trade or triggering costly shutdowns.

At one national retail chain, a WHS inspector flagged the front entry tiles and food court walkway as a high slip risk. Within 48 hours, our team was onsite applying a P4-rated clear coating after hours. The next morning, the store reopened safely with no visual disruption and full compliance.

We’ve applied our CSIRO-certified coatings across:

  • Polished tile entries (shopping centers)
  • Cold zones near fridges and produce
  • Ceramic tiles in shared retail bathrooms
  • Food courts, kitchens and back of house


Whether you’re prepping for audit, responding to an incident, or need a no-trade-impact solution—we’ve already done it in sites just like yours.

No Shutdowns — Overnight Cure
No Shutdowns — Overnight Cure
CSIRO Certified: P3, P4 and P5 Slip Ratings
CSIRO Certified: P3, P4 and P5 Slip Ratings
Audit-Ready — Pass Any WHS or Safety Inspection
Audit-Ready — Pass Any WHS or Safety Inspection
Safe on Surfaces — No Etching, No Damage
Safe on Surfaces — No Etching, No Damage
Slip Incident Report Clipboard

One Slip Could Cost More Than Just a Claim

Every centre has policies. But once someone slips, a checklist won’t cover the legal, reputational, or financial fallout.

Falls in retail and commercial spaces are one of the most litigated WHS claims in Australia. One incident can lead to:

❌ Public liability claims & injury lawsuits
❌ Insurance premium spikes or denials
❌ Breach of WHS regulations
❌ Brand damage or negative media
❌ Shutdowns or forced re-tiling from landlords

In nearly every case, the hazard had already been flagged—but no compliant solution was installed.

🛑 Don’t wait for an incident. Our certified coatings are designed to pass audits, protect people, and keep your business running—before the fines, lawsuits, or shutdowns begin.

Book a Free Risk Assessment

From Fail to Pass—Without Ripping Up a Single Tile

Stellmann coatings are designed for high-traffic, high-risk retail floors—installed fast, certified to CSIRO standards, and fully audit-compliant.

At shopping centres like Stockland and national franchises like Coles and Nando’s, we’ve taken slippery, non-compliant surfaces and brought them to P4 or P5 compliance—without damaging the substrate or disrupting trade.

Before and After Non-Slip Treatment

P1 Slip Hazard → P4 Certified Safety — Real transformation. No tile removal. No shutdown.

Inspect Icon

1 Inspect & Test

We assess your surfaces, identify risks, and document current slip ratings.

Apply Coating Icon

2 Apply Non-Slip Coating

1-coat system, fast to install, invisible finish, water-based and odour-free.

Certify Icon

3 Certify for Safety

You receive a CSIRO-compliant surface rated to P3, P4 or P5—ready for audit.

Get a Certified Site Assessment →

Who This Is For

  • 🛒 Retailers prepping for WHS inspections
  • 🧽 Cleaning managers dealing with flagged tiles
  • 🏬 Shopping centre ops needing P3/P4/P5 ratings
  • 🛠️ Facility Managers avoiding shutdowns
  • 🧱 Areas with tiles, concrete, polished stone, vinyl, etc

What’s Included in Your Free Site Assessment

  • ✅ Onsite surface risk inspection
  • ✅ AS 4663 Slip Test Report review
  • ✅ Compliance strategy roadmap
  • ✅ Sample test patch (if requried)
  • ✅ Fixed quote with no obligation
Compliance Lock

Compliance Guarantee

Stellmann’s Install Promise: You Pass or We Fix It.

Certified to AS 4586 and backed by CSIRO-certification, our Slip-Test Pass Guarantee ensures your space is fully compliant—without retesting stress.

*Terms & conditions apply.

Works on surfaces where others fail

Close-up of anti-slip coated bathroom tiles with CSIRO-certified Stellmann clear treatment – enhances grip without changing appearance

Ceramic & Porcelain Tiles

Most common in bathrooms, entry's, and back of house — includes smooth, glazed, or textured tiles.
Textured anti-slip vinyl flooring with matte finish, ideal for wet areas, bathrooms, and NDIS home modifications – slip-resistant to AS 4586 standards

Vinyl & Lino

Common in foodcourts, fridge zones, and food isle — includes vinyl planks, sheeting, and linoleum.
Textured brown marble tile coated with Stellmann non-slip clear treatment – P4 slip rating for wet indoor areas like kitchens and hallways

Natural Stone & Terazzo

Used in shopping malls, lobbies, and commercial fit-outs — includes marble, travertine, and terrazzo.
Close-up of timber flooring protected with Stellmann’s clear anti-slip coating – transparent, CSIRO-rated P3 solution for wood surfaces in wet and high-traffic areas

Timber & Laminate

Seen in retail and hospitality — includes hardwood, engineered timber, hybrid & laminates.
Close-up of concrete surface finished with Stellmann clear non-slip coating – CSIRO-certified P5 anti-slip treatment for commercial and residential safety

Polished Concrete

Found in warehouses, showrooms, and aged care — suitable for honed or burnished finishes.
Semi-gloss clear non-slip coating over epoxy floor – durable, CSIRO-certified finish ideal for commercial kitchens, garages, and workshops, compliant with AS 4663 slip rating

Epoxy

Industrial-grade floors needing non-slip — includes water-based paint, acrylic-based paint & commercial epoxies.
Circular glass panels with factory-applied anti-slip dot matrix pattern – compliant with AS 4586 slip rating for commercial flooring and architectural glazing

Glass

Seen in boutique shops and roofs — requires specialty slip coatings.
Close-up of brass surface coated with Stellmann clear anti-slip treatment – industrial-grade, transparent P4-rated finish for wet, metallic floors and ramps

Metall

Common in fire stairs, loading docks & work zones — includes checker plate and treads.

Tired of Paying to Fail Your Slip Test Twice?

📍 Trade Hall, 377–383 Sussex St, Sydney
🏢 Facility Manager: Kirill K., Colliers

Kirill did what most facility managers do—called in a “non-slip” specialist. They acid-etched the tiles. It looked rough. But on test day? ❌ Fail.

Result:
– Surface now visibly damaged
– Failed the audit again
– Paid for treatment and the retest—and still failed
One call. One coat. One pass.
1 Week Later:
Certified Installer coated the floor - no acids, no mess
– Passed AS 4586/4663 with a P4 rating
No damage. No rework. No retest fees.
🛡️ Don’t risk your compliance on outdated methods. Stellmann gets you passed—first time.
Find a Certified Installer →
Non-slip treatment failed surface
✖ Failed Slip Test
Stellmann compliant non-slip finish
✔ P4 Slip-Test Passed

FAQ

How long does the installation take? Will we need to shut down the area?

Most installations take just a few hours—and our certified isntallers work after hours to avoid disruption.

Your floors will be safe, compliant, and ready to walk on by morning.

We’re trusted by shopping centers, retailers, and 24/7 operations because our coatings:

  • Cure overnight (no long shutdowns)
  • Leave no visible change to flooring
  • Don't require grinding, etching or re tiling

If you have tight trade windows or tenancy access constraints, we’ll schedule around them.

What kind of floors can your non-slip coating be applied to?

Our coatings bond to most retail and commercial surfaces including:

  • Ceramic tiles
  • Vinyl & lino flooring
  • Natural stones (granite, marble, terrazzo)
  • Concrete
  • And many others


If it’s found in supermarkets, malls, or hospitality venues—we’ve almost certainly coated it.

Every free site assessment includes a test patch to ensure perfect surface compatibility.

Does it actually help us pass a slip test?

Yes—our coatings are CSIRO-certified and proven to meet slip ratings under AS 4586 and AS 4663.

We guarantee you'll pass your slip test after installation.

Your site assessment includes:

  • AS 4663 Slip Test report review
  • Onsite sample patch
  • Fixed quote before you commit


Trusted by JLL, Coles, and national retail chains—because we get results, not failed re-tests.

How long does the coating last?

Most non-slip treatments on the market only last 3–6 months before performance drops below compliance. Stellmann’s CSIRO-certified coating delivers on average 2–4 years of durable, P-rated protection, even in high-traffic aged care and hospital environments. That’s 4x to 8x the lifespan—without the surface damage, rework, or re-tests.

We also offer maintenance plans and scheduled reapplication options to help you stay audit-ready with zero hassle at all times.

How much does a compliant non-slip coating cost?

Pricing depends on your floor size, layout, and the slip rating you need to meet.

That’s why we start with a Free Site Risk Assessment, which includes:

  • Onsite inspection & slip risk grading
  • Fixed, all-inclusive quote (no hidden fees)
  • Compliance roadmap for WHS and landlord approval

    No surprises. No pressure. Just clear numbers and certified safety.
Can we use this as part of our accreditation or audit response?

Absolutely. We’ve helped dozens of facilities prepare for WHS audits, respond to incident reports, and meet NDIS & Aged Care Commission requirements. We provide full documentation and Slip Test Report compatibility.

Can you install after hours or between trade hours?

Yes. Most of our retail, shopping centre and franchise clients choose after-hours installations to avoid trade disruption. Our coatings cure overnight, and our certified installers are in-and-out with zero mess or closures.

If you’re running multiple tenancies or managing center access windows, we can schedule around those too.

Will this meet our landlord or center slip rating requirements?

Yes. Our coatings are independently CSIRO certified to meet AS 4586 / AS 4663 P3, P4, and P5 slip ratings. These are the standards typically required by major landlords (e.g., Lendlease, Stockland, etc.).

We’ve helped both national retailers and center operators bring flagged sites into compliance—without re tiling or reworking floors.

Don’t Let Slips or Failed Audits Catch You Off Guard

Book your Free Site Risk Assessment today and find out exactly where your risks are, how to fix them fast, and what it takes to pass your next audit with confidence— no shutdowns, no guesswork, no wasted spend.

✅ Book My Free Site Risk Assessment →

Prefer to speak now? Call us on 1300 175 849

Contact us

We reply within 24 hours.
Do you need immediate assistance?
Give us a call at 03 7020 2041