Slip-Free Floors, Paths & Public Spaces - Compliant, Certified, and Ready for Any Audit.
CSIRO-Certified Non-Slip Coatings for Councils, Education, Transport, and Public Venues. No Closures. No Damage. Audit-Ready in 24 Hours.
Not sure what you need?
Give us a call at 1300 987 095.
Trusted by Australia’s Leading Councils, Transport Networks & Education Providers
How Australia’s Top Councils, Schools & Public Venues Eliminated Slip Risk - Without Disruption
From council libraries to school playgrounds, Stellmann has helped facilities like the City of Melbourne, Queensland Government, TAFE NSW, and UNSW eliminate slip hazards - without needing to rip up floors or close public spaces.
In one venue project, a WHS inspector flagged slippery bathrooms at the John Cain Arena in Melbourne used daily by the public. Within 24 hours, a Stellmann Certified Installer was onsite - applying a clear, P4‑rated coating. By the next morning, the site was fully compliant, open to the public, and visually unchanged.
We’ve applied our CSIRO‑certified coatings across:
- School corridors, classrooms & canteens
- Library & community center floors
- Council footpaths, walkways & ramps
- Public transport platforms & entries
- Sports Venues & Bathrooms
Whether you’re preparing for a compliance audit, responding to an incident, or fixing a failed slip test - we’ve already done it in environments just like yours.
No Shutdowns — Overnight Cure
CSIRO Certified: P3, P4 and P5 Slip Ratings
Audit-Ready — Pass Any WHS or Safety Inspection
Built for High‑Traffic Spaces
A Failed Slip Test Can Cost More Than Funding
very council, school, or public facility has policies. But once someone slips, paperwork won’t protect you.
Slip incidents in public spaces and education settings are among the most reported WHS hazards in Australia. One incident can lead to:
❌ Injuries to students, staff, or visitors - from minor falls to serious harm
❌ Immediate WHS breach notices - forcing urgent remediation works
❌ Local Government or Department of Education investigations
❌ Insurance claims that drag on for months - raising premiums
❌ Public backlash and negative media coverage - damaging trust
And in many cases, the surface had already been flagged - but no compliant fix was applied.
🛑 Don’t wait for an incident to take action. Our CSIRO‑certified coatings are designed to help you pass audits - and protect people - before the paperwork begins.
Book a Free Compliance WalkthroughFrom Slip Failures to Compliance Passes - Without Closing Your Doors
Stellmann coatings are purpose‑built for schools, councils, transport hubs, and public venues - installed fast, cured overnight, and certified to meet Australia’s strictest slip‑resistance standards.
In projects for the City of Melbourne and TAFE NSW, we’ve taken non‑compliant, P1 or P2‑rated surfaces and brought them up to P4 or P5 - without replacing a single tile or shutting down a facility.
P1 Slip Hazard → P4 Certified Safety - Real transformation. No tile removal. No shutdown.
1 Inspect & Test
We assess your surfaces, identify risks, and document current slip ratings.
2 Apply Non-Slip Coating
1-coat system, fast to install, invisible finish, water-based and odour-free.
3 Certify for Safety
You receive a CSIRO-compliant surface rated to P3, P4 or P5-ready for audit.
Who This Is For
- 🏫 Schools & Facility Managers preparing for DoE or WHS audits
- 🚉 Safety Officers needing P4/P5 slip ratings for platforms & walkways
- 🏛 Council Asset Managers fixing flagged flooring in public spaces
- 👷 Project Managers avoiding shutdowns during upgrades
- 🛝 Wet area zones: Vinyl, Tiles, Concrete, Stone, etc
What’s Included in Your Free Site Assessment
- ✅ Onsite surface risk inspection
- ✅ AS 4663 Slip Test Report review
- ✅ Compliance strategy recommendations tailored to public sector
- ✅ Onsite sample test patch in a high‑risk zone
- ✅ Fixed quote for installation (if required) with no hidden costs
Compliance Guarantee
Stellmann’s Install Promise: You Pass or We Fix It.
Certified to AS 4586 and backed by CSIRO-certification, our Slip-Test Pass Guarantee ensures your space is fully compliant-without retesting stress.
*Terms & conditions apply.
Works on surfaces where others fail
Ceramic & Porcelain Tiles
Most common in bathrooms, kitchens, and public bathrooms - includes smooth, glazed, or textured tiles.
Vinyl & Lino
Common in aged care, schools, and public buildings - includes vinyl planks, sheeting, and linoleum.
Natural Stone & Terazzo
Used in hotels, lobbies, and commercial fit-outs - includes marble, travertine, and terrazzo.
Timber & Laminate
Seen in retail and hospitality - includes hardwood, engineered timber, hybrid & laminates.
Polished Concrete
Found in warehouses, showrooms, and aged care - suitable for honed or burnished finishes.
Epoxy
Industrial-grade floors needing non-slip - includes water-based paint, acrylic-based paint & commercial epoxies.
Glass
Seen in boutique shops and roofs - requires specialty slip coatings.
Metall
Common in fire stairs, loading docks & work zones - includes checker plate and treads.
Tired of Paying to Fail Your Slip Test Twice?
📍 Trade Hall, 377–383 Sussex St, Sydney
🏢 Facility Manager: Kirill K., Colliers
🏢 Facility Manager: Kirill K., Colliers
Kirill did what most facility managers do-called in a “non-slip” specialist. They acid-etched the tiles. It looked rough. But on test day? ❌ Fail.
❌ Result:
– Surface now visibly damaged
– Failed the audit again
– Paid for treatment and the retest-and still failed
– Surface now visibly damaged
– Failed the audit again
– Paid for treatment and the retest-and still failed
One call. One coat. One pass.
✅ 1 Week Later:
– Certified Installer coated the floor - no acids, no mess
– Passed AS 4586/4663 with a P4 rating
– No damage. No rework. No retest fees.
– Certified Installer coated the floor - no acids, no mess
– Passed AS 4586/4663 with a P4 rating
– No damage. No rework. No retest fees.
🛡️ Don’t risk your compliance on outdated methods. Stellmann gets you passed-first time.
Find a Certified Installer →
✖ Failed Slip Test
✔ P4 Slip-Test Passed
FAQ
How long does the installation take? Will we need to shut down the area?
In most cases, there’s no shutdown required. Our certified installers schedule works during school holidays, weekends, or after‑hours to minimize disruption. The coating cures overnight - meaning your classrooms, walkways, or public spaces can be back in use by morning. That’s why we’re trusted by councils, transport networks, and education providers with high‑traffic environments.
What kind of floors can your non-slip coating be applied to?
We apply our coating to vinyl, lino, ceramic tiles, natural stone, concrete, and more. If your surface is found in a school, council facility, transport hub, or public venue, we’ve almost certainly treated it before.
Our free compliance walkthrough includes surface testing to confirm compatibility - and we can apply an onsite sample patch so you can see the finish before committing.
Does it actually help us pass a slip test?
Yes. Stellmann coatings are CSIRO‑tested and certified to AS 4586/4663 standards - the same standards referenced in WHS inspections and Department of Education safety guidelines.
We guarantee a passing slip rating upon installation. As part of your free compliance walk through, we can apply a test patch in a high‑risk zone and provide a fixed quote before you commit.
* Terms & Conditions apply
How long does the coating last in high‑traffic public spaces?
Most non‑slip treatments on the market only last 3–6 months before performance drops below compliance. Stellmann’s CSIRO‑certified coating delivers, on average, 2–4 years of durable, P‑rated protection - even in school corridors, council walkways, transport platforms, and other high‑traffic public spaces.
That’s 4x to 8x the lifespan of typical treatments - without the surface damage, rework, or re‑tests. We also offer maintenance plans and scheduled reapplication to keep you audit‑ready all year with zero disruption.
What’s the cost of getting this installed?
Costs vary depending on surface size, current slip rating, and site layout. That’s why we offer a free compliance walkthrough, which includes a fixed quote and a tailored WHS compliance strategy for your school, council facility, or public venue.
No surprises. No pressure. Just a clear plan to get you audit‑ready and keep your community safe.
Can this be used as part of a WHS audit, safety inspection, or funding application?
Absolutely. Stellmann coatings are CSIRO‑certified to AS 4586/4663 slip‑resistance standards, which are recognized standards in WHS legislation, Department of Education safety frameworks, and local government compliance requirements.
We can provide slip test reports, certification documents, and maintenance schedules to support WHS audits, safety inspections, and even grant or funding applications for safety upgrades.
Do you work during school holidays, weekends, or after hours?
Yes - our certified Installers regularly schedule installations during school holiday periods, weekends, and after‑hours to avoid disrupting classes, public events, or daily operations.
For councils and public venues, we can coordinate around event schedules, library hours, or transport timetables to ensure the space stays accessible when it matters most.
Our overnight‑cure system means the area is safe, compliant, and ready for use by the next day.
Don’t Let Slips or Failed Audits Catch You Off Guard
Book your Free Site Risk Assessment today and find out exactly where your risks are, how to fix them fast, and what it takes to pass your next audit with confidence- no shutdowns, no guesswork, no wasted spend.
✅ Book My Free Site Risk Assessment →Prefer to speak now? Call us on 1300 175 849
Contact us
We reply within 24 hours.
Do you need immediate assistance?
Give us a call at 03 7020 2041
- Choosing a selection results in a full page refresh.
!