Anti-slip coating for engineered stone adds grip to engineered stone floors without acid etching. It suits Caesarstone, Quantum Quartz and Essastone floors. Stellmann coatings carry CSIRO-certified slip resistance ratings from P3 to P5 under Australian Standard AS 4586. Suitable for wet kitchens, bathrooms and commercial food prep areas.
Whether you look after commercial engineered stone floors or a kitchen floor at home, Stellmann has you covered. A Stellmann Certified Installer can apply it.
Application by a Stellmann Certified Installer
Stellmann supplies the CSIRO-tested coating, and a Stellmann Certified Installer applies it. Ideal for commercial properties, strata buildings, aged care facilities, and any project where documented compliance is essential.
* Terms and Conditions apply
HOW IT WORKS
Call or send an enquiry. Tell us the stone brand, the finish, where the floor is and who walks on it. We match the right Stellmann product and P rating.
Free product match by surface
A Stellmann Certified Installer cleans the stone and tests adhesion on polished or sealed stone, then primes and applies the coating. No acid etching.
Walk on it after 12 hours
Stellmann coatings carry CSIRO-certified slip resistance ratings from P3 to P5 under Australian Standard AS 4586. On-site assessment can be arranged for commercial projects.
We guarantee your treated floors achieve the P rating you specify on an independent slip test.* If they do not, we reapply to achieve it or refund the product price.
*Requires an independent NATA-accredited test within 48 hours of completion. Full conditions at stellmann.com.au/policies/terms-of-service.
WHY STELLMANN
Every benefit below addresses the specific challenges facing engineered stone surfaces.
Resin-safe formula compatible with Caesarstone, Quantum Quartz and Essastone manufacturer standards
No acid, so nothing eats into the stone
CSIRO-certified slip resistance ratings from P3 to P5 under Australian Standard AS 4586
A Stellmann Certified Installer applies the matched coating
Most anti-slip treatments for engineered stone rely on acid etching. a process that chemically attacks the surface to create texture. While this adds temporary grip, it permanently damages the finish, voids warranties, and typically degrades within 6-12 months.
Stellmann takes a different approach. The coating adds a fine, slightly gritty micro-texture without acid etching: the grit is the grip.
The result: grip without acid etching, from a coating with CSIRO-certified slip resistance ratings from P3 to P5 under Australian Standard AS 4586. Whether a Stellmann Certified Installer applies it or your own team uses the DIY kit, it is the same coating.
Homeowners with Children: Adding bathroom safety without expensive renovation or product incompatibility risks
Elderly Homeowners: Protecting against fall risks while maintaining independent living and bathroom dignity
NDIS Participants & Disability Support Seekers: Accessing approved home modification funding for accessible bathroom safety
Aged Care Facility Managers: Protecting residents on acrylic fixtures while maintaining quality facility bathrooms
Hospitality Venue Operators: Adding safety to accessible room acrylic showers without aesthetic compromise
SERVICE
For commercial properties and homeowners who want the job done right the first time, Stellmann’s professional application service delivers a complete, certified anti-slip solution from start to finish.
We test your surfaces and recommend the right P-rating
Professional application by certified, insured technicians
Same-day or next-day completion for most residential projects
Certificate for each treated area.
We guarantee your treated floors achieve the P rating you specify on an independent slip test.* If they do not, we reapply to achieve it or refund the product price. *Requires an independent NATA-accredited test within 48 hours of completion. Full conditions at stellmann.com.au/policies/terms-of-service.
Post-treatment maintenance guide and ongoing support
Metro, suburban, and regional.
Whether it’s a single bathroom or an entire commercial facility, our technicians work around your schedule to minimise disruption. Most residential jobs are completed within a few hours. Commercial projects are scheduled for evenings or weekends to avoid operational downtime.
COMMON QUESTIONS
Straight answers about engineered stone from the Stellmann team.
Check your stone maker's warranty terms before any treatment.
Engineered stone uses polyester or acrylic resin binders. Certain chemicals can soften the resin, causing yellowing, cloudiness and surface degradation. Stellmann's coating bonds without resin interaction, eliminating all chemical risk.
All three are quartz-composite engineered stones with similar resin chemistry. Stellmann's coating adds slip resistance on each without acid etching.
Yes. Our coating is food-contact-safe once fully cured and is approved for use in commercial kitchens and food prep areas where hygiene standards are critical.
Yes. Your own team can apply it with the DIY kit. Call 1300 987 095 or send the form for a free product match.
!