Anti-Slip Coating for Brass | Luxury Surfaces Without Compromise
Slip safety for brass surfaces. Protect the finish, add the grip.
Whether you look after brass in a hotel, heritage building or home, Stellmann has you covered. A Stellmann Certified Installer can apply it.
Tested to AS 4586
Walk on it after 12 hours
No acid
Book Your Free Site Assessment
Tell us about your surface. We'll do a free site assessment and product match, and send a no-obligation quote.
CSIRO-CERTIFIED
AS 4586 COMPLIANT
5-YEAR PRODUCT WARRANTY*
1,924 COMMERCIAL PROJECTS
Protect Your Brass
Application by a Stellmann Certified Installer
Stellmann supplies the CSIRO-tested coating, and a Stellmann Certified Installer applies it. Ideal for commercial properties, strata buildings, aged care facilities, and any project where documented compliance is essential.
- Free site assessment before your quote. Independent slip testing can be arranged for commercial jobs.
- Application by a Stellmann Certified Installer
- Independent slip test report when a test is booked
- 5-year no-peel product warranty*. T&Cs apply.
- Australia-wide service, metro and regional
* Terms and Conditions apply
HOW IT WORKS
How Our Professional Brass Coating Process Works
1
Profile
Call or send an enquiry for a free site assessment and product match. Tell us about the brass, its finish, where it is and who walks on it. We match the right Stellmann product and P rating. Independent slip testing can be arranged for commercial jobs.
Free product match by surface
2
Treat
A Stellmann Certified Installer lightly sands the brass, primes it and applies the coating. No acid etching.
Walk on it after 12 hours
3
Verify
You can walk on it after 12 hours, and it fully cures in about 5 days.
4
Compliance Guarantee*
We guarantee your treated floors achieve the P rating you specify on an independent slip test.* If they do not, we reapply to achieve it or refund the product price.
*Requires an independent NATA-accredited test within 48 hours of completion. Full conditions at stellmann.com.au/policies/terms-of-service.
➝
Most facilities are fully treated and compliant within 48 hours of first contact.
WHY STELLMANN
Key Benefits of Stellmann’s Brass Coating
Every benefit below addresses the specific challenges facing brass surfaces.
NO ETCHING
No Acid Etching
No acid and no etching
CSIRO Certified
CSIRO Certified to AS 4586
P3, P4, P5 ratings for high-traffic luxury environments where slip risks are greatest
Removable
Heritage-Safe & Reversible
The coating comes off with the Stellmann Coating & Paint Remover without damaging the brass
UV-STABLE
UV Resistant & Non-Yellowing
The clear coating is UV-resistant and does not yellow
CSIRO-Certified · Tested to AS 4586
Ready to Make Your Brass Surfaces Slip-Safe?
Application by a Stellmann Certified Installer
We assess, apply, and certify your brass surfaces. Full compliance documentation included.
Free site assessment · Zero obligation · Australia-wide · We never share your information
Why Stellmann vs Alternatives for Brass
Stellmann vs Grit & Aggregate Overlays: Textured overlays destroy brass's luxury aesthetic and announce themselves as visible modifications. Stellmann uses a two-part coating instead, with no acid and no etching.
Who Needs Anti-Slip Coating for Brass?
Luxury Hotel Managers: Managing slip risks on brass walking surfaces in lobbies and entrances.
Heritage Building Conservators: Assessing slip risks on historical brass walking surfaces
Corporate Banking Executives: Adding safety to ceremonial brass features in prestigious foyers and board rooms
High-End Residential Builders: Specifying slip resistance on brass walking surfaces in luxury homes.
Architectural Conservation Consultants: Assessing coating compatibility with heritage brass finishes
SERVICE
Done-For-You: Professional Anti-Slip Coating Service
For commercial properties and homeowners who want the job done right the first time, Stellmann’s professional application service delivers a complete, certified anti-slip solution from start to finish.
FREE ASSESSMENT
Free on-site slip assessment
We test your surfaces and recommend the right P-rating
Professional
Professional application
Professional application by certified, insured technicians
ZERO DOWNTIME
Fast application
Same-day or next-day completion for most residential projects
COMPLIANCE
CSIRO-certified P-rating compliance
Certificate for each treated area
Guarantee
Compliance Guarantee*
We guarantee your treated floors achieve the P rating you specify on an independent slip test.* If they do not, we reapply to achieve it or refund the product price. *Requires an independent NATA-accredited test within 48 hours of completion. Full conditions at stellmann.com.au/policies/terms-of-service.
Support
Maintenance & Support
Post-treatment maintenance guide and ongoing support
LOCATION
Australia-wide service
Metro, suburban and regional
Whether it’s a single room or an entire commercial facility, our technicians work around your schedule to minimise disruption. Most residential jobs are completed within a few hours. Commercial projects are scheduled for evenings or weekends to avoid operational downtime.
CSIRO-Certified · Tested to AS 4586
Book Your Free Site Assessment
We’ll test your brass surfaces, recommend the right treatment, and provide a no-obligation quote.
Click to open expanded view
Success Stories
Anti Slip Flooring Melbourne: Stellmann Non-Slip at ANZ
Anti Slip Flooring Melbourne: Stellmann Non-Slip at ANZ
Caterpillar: Industrial Anti Slip Floor Coating Solutions
Caterpillar: Industrial Anti Slip Floor Coating Solutions
We Don’t Just Say It - We Certify It
Trusted by leading brands, builders & care facilities
COMMON QUESTIONS
Frequently Asked Questions
Straight answers about brass from the Stellmann team.
Will the coating change the colour or finish of my brass?
The colour stays. Polished brass turns satin where it is coated.
Can the coating be removed if the brass needs restoration?
Yes. Unlike acid etching, which is permanent damage, Stellmann's polymer coating can be removed using specialised techniques if future restoration or conservation work is required. This reversibility is important for heritage buildings where future generations may want to restore original materials.
Is the coating suitable for heritage buildings?
Yes. Stellmann is widely used on heritage brass because it adds safety without visibly modifying the material. Many heritage conservators recommend it specifically because it does not permanently damage the substrate and can be maintained or removed if needed.
Will humidity affect the coating in humid retail or hospitality environments?
Once cured, it handles humid rooms.
CSIRO-Certified · Tested to AS 4586
Protect Your Brass Surfaces
Every week without certified slip protection is a week you carry unnecessary risk.
Application by a Stellmann Certified Installer
We assess, apply, and certify your brass surfaces. Full compliance documentation included.
Free site assessment · Zero obligation · Australia-wide · We never share your information
- Choosing a selection results in a full page refresh.
!