Non-Slip Coatings FAQ | Stellmann

Absolutely. Our non-slip coating is specifically engineered to excel in outdoor environments. Being a premium-quality, dual-component PU coating, it offers superior strength and flexibility. Additionally, its formulation is designed to resist yellowing and is UV-resistant, ensuring a long-lasting, high-performance solution for enhancing slip-resistance in both indoor and outdoor spaces. So, whether it’s a backyard, walkway, or patio, Stellmann Non-Slip provides a reliable and durable anti-slip solution.

Stellmann Non-Slip Clear is engineered for user-friendly applications, featuring an easy roll-on process. Follow these steps for optimal results:

1. Prepare the Surface: Ensure the surface is clean and thoroughly dry before application.
2. Apply Primer: Use the primer provided with our product. Apply a thin layer by sponge or microfibre mop. Allow Curing: Let the primer cure for approximately 30 minutes.
3. Apply Stellmann Non-Slip Clear: Once the primer has cured, mix the two-components of our non-slip coating and apply a single layer evenly over the surface.

For comprehensive guidelines and instructional videos, visit our installation support page.

To ensure the longevity of your Stellmann Non-Slip surface, we advise implementing a simple and regular maintenance routine. Depending on the slip-rating of your coating, the cleaning process varies slightly. See our Technical Advise & Maintenance Instructions for more information.

For our P3 rated coatings, designed for interior areas, cleaning is easy with a (microfiber) mop, brush, or cleaning machine. For higher slip ratings typically used in outdoor settings, we recommend cleaning with a hose, pressure washer, broom brush or cleaning machine.

The Stellmann Prep & Maintenance is an effective and powerful cleaner to maintain your Stellmann surface clean. It concentrated formula makes it a very economical cleaner which will go a long way. Be sure to consult our Technical Advice and Maintenance instructions for proper usage, including do’s and don’ts, chemical exposure guidelines, and additional instructions to maintain the integrity of your non-slip surface.

After applying Stellmann Non-Slip Clear, the original surface remains visible since the coating is completely clear. Once cured, it provides a transparent non-slip surface with a subtle satin finish that maintains the natural look of your surface.

Stellmann Non-Slip Clear is versatile and adheres exceptionally well to a wide range of surfaces. You can confidently apply our coating on various materials including tiles, ceramics, marble, terrazzo, natural stone, concrete, vinyl, fiberglass showers, and even metal and glass surfaces.

What sets our product apart is the non-etching formula, making it safe for use on delicate surfaces like marble, travertine, and bluestone without causing any damage to the surface.

For surfaces previously treated with solvent-based products or nano (non-stick) treatments, we recommend conducting an adhesion test prior to application. If you have any questions or uncertainties, feel free to reach out to us for guidance and support.

Stellmann Non-Slip Clear creates a durable non-slip seal on top of the surface. Due to our exceptional adhesion, our coating can be applied to a wide range of surface without peeling. The slip-resistance is achieved through the integration of a soft non-slip grain within the coating, ensuring traction even when the surface is wet.

Additionally, the coating is water-repellent, causing water to bead up and not spread out over the surface, thus reducing the risk of aquaplaning and further enhancing its non-slip functionality. This combination of properties makes Stellmann Non-Slip effective for improving traction and safety on surfaces in various environments.

Stellmann Non-Slip specialises in the development of premium quality water-based coatings. Our non-slip solutions are VOC-free systems. Therefore, they have a significantly reduced environmental impact compared to traditional solvent- and oil-based coatings.

Besides being a sustainable safety solution, our coatings are classified as non-toxic and non-dangerous for road and air-freight. This means our coatings are much friendlier for the applicator and user compared to conventional solutions.

Since Swiss GriP Australia was introduced in 2019, it rapidly became one of the nation’s leading non-slip solution providers. Building on this success, the company was acquired by Stellmann Coatings. Under the Stellmann name we have expanded our offering of high-quality, durable, and easy to apply non-slip coatings beyond the original Swiss Grip product.

Stellmann’s water-based coatings offer numerous advantages:

• Environmental Sustainability: Our coatings are VOC-free and water-based, making them a more eco-friendly choice compared to traditional oil- and solvent-based coatings.
• Safety: Classified as non-dangerous goods, our coatings are safer to handle and apply, posing less risk to both applicators and end-users.
• Safety: Classified as non-dangerous goods, our coatings are safer to handle and apply, posing less risk to both applicators and end-users.
• Quality Assurance: We maintain the highest standards of quality, ensuring that our coatings perform exceptionally well without compromising on environmental responsibility.

Choosing Stellmann’s water-based coatings means you are opting for a sustainable, high-performance, and safer solution for your coating needs.

Stellmann Non-Slip Clear is a premium-quality, transparent, dual-component polyurethane coating specifically engineered to eliminate the risk of slips and falls on a wide range of surfaces. It is formulated to address slipping risks in both wet and dry conditions, and this innovative solution offers various slip ratings to cater to different requirements, ensuring superior traction and peace of mind in any environment.

Stellmann Non-Slip Clear stands out as a premium, water-based non-slip coating, offering a superior alternative to traditional anti-slip treatments. Unlike these treatments, which are an acid that etches into the surface, Stellmann’s approach prioritises safety without compromising the integrity of surfaces.

Where etching and acid treatments are corrosive and therefore lead to surface damage by creating micro-cracks, our non-slip coating creates a protective non-slip seal on top of the surface. Additionally, traditional treatments may discolour and stain surfaces. For this reason many anti-slip treatment providers will remain unclear or evasive about what their product really is and does.

Moreover, anti-slip treatments tend to underperform in wet conditions, posing ongoing safety concerns. In contrast, Stellmann Non-Slip Clear is certified by CSIRO with a range of slip-ratings conform the Australian Standard for Slip-Resistance, guaranteeing its efficacy and reliability.

For those seeking a durable, functional, and certified non-slip solution, Stellmann Non-Slip Clear is the ideal choice.

You can conveniently purchase our coatings directly from our online store, available in a variety of pack sizes. Additionally, our 1.2m2 packs are accessible at National Tiles stores nationwide. For larger packs like the Stellmann Non-Slip Clear 5m2 and 15m2, you can find them at National Tiles Trade stores.

Installation Service
As Australia’s leading supplier of non-slip coatings we have certified a range of professional installation companies. Fill out our contact form or reach us at 1300 987 095 to get in touch with an installer near you.

Trade
Join Stellmann Trade for exclusive benefits including trade prices, free delivery, and priority advice from our experts. Moreover, we offer assitance in becoming a certified installer, unlocking further advantages.

Visit Us
Feel free to visit us at 448 City Road in South Melbourne. Ensure to schedule an appointment via phone or email. Convenient parking is available at the rear of our premises or on Ferrars Street.

Stellmann Non-Slip Clear stands out with its CSIRO-certification in accordance with the Australian Standard for slip-resistance (AS 4586-2013). Our commitment to safety is evident in the development of multiple formulations, each tailored to different slip-ratings. For instance, we offer options ranging from P3 ratings (soft and normal) to P4 and P5 ratings, ensuring suitability for diverse needs.

Moreover, our dedication to quality assurance extends beyond initial certification, as many of our coatings undergo testing and certification post-installation in accordance to AS 4663-2013 by independent slip-test companies such as ATTAR, SafeEnvironments, and SlipTesting Australia. This comprehensive certification process underscores our commitment to providing reliable and certified non-slip solutions.

Stellmann Non-Slip Clear is available in various slip-ratings. We offer P3 Soft, P3, P4 and P5. Here is a short summary of where to use which slip-rating. In case of any further questions please contact us. Our slip-ratings are CSIRO-certified so you do not need a higher slip-rating than officially required, even if your current tiles or surface claims to have that slip-rating.

P3 Soft: Interior areas that do not get frequently wet such as foyers, lobbies, walkways in offices, food courts, stairs, etc. Not for barefoot areas.

P3: Indoor areas such as showers, bathrooms, entry areas, residential kitchens, stairs, toilet facilities in offices, hotels and shopping centres

P4: Outdoor areas such as entry areas, walkways, stairs, steps, court yards, balconies, verandas, carports, driveways.

P5: Commercial kitchens, external ramps including sloping driveways, footpaths etc., steeper than 1 in 14.