Applied it in our shower on Saturday — no more slippery tiles, and it still feels smooth underfoot. Our OT said it was the perfect choice for barefoot safety. Karen L.

Verified Customer
Stellmann Non-Slip Clear Pro Kit – P3 Rated 1.2m² Coverage for Shower Floors & Bathroom Tiles with Primer, Hardener & Roller | DIY Anti-Slip Solution
Side-by-side image showing transparency on untreated tile versus Stellmann non-slip coated tile for slip-resistance demonstration
Comparison of slippery tile versus tile treated with Stellmann non-slip coating, highlighting improved safety and compliance

Non-Slip Clear PRO - P3 - 1.2sqm

Safe Barefoot Grip in 1 Hour — Invisible Finish

Sale price
$79
Regular price
$109
You save
$30

Slip Ratings:

Coverage

✅ CSIRO Certified P3/P4/P5

Safety that passes every slip test

🕵️ Invisible Finish

No etching. No tile damage.

🛡️ 5-Year Warranty

No peel. No fade. Guaranteed adhesion. Terms & Conditions apply.

Installation Service

Free Quote

🚑 Slips & Falls cost $20K+ per hospital case - prevention is cheaper. ¹

Stellmann Non-Slip Clear Pro Kit – P3 Rated 1.2m² Coverage for Shower Floors & Bathroom Tiles with Primer, Hardener & Roller | DIY Anti-Slip Solution

Non-Slip Clear PRO - P3 - 1.2sqm

$79
$109

Product Information

Stellmann non-slip coating application process in three steps: Step 1 - Clean tile floor with a brush, Step 2 - Apply primer with sponge, Step 3 - Roll on clear coat with a roller.
Stellmann Non-Slip Clear Pro Kit – P3 Rated 1.2m² Coverage for Shower Floors & Bathroom Tiles with Primer, Hardener & Roller | DIY Anti-Slip Solution
Stellmann Non-Slip Clear Pro shown with various compatible surfaces including tile, timber, concrete, glass, vinyl, and marble
Stellmann Non-Slip Clear Pro Kit – P3 Rated 1.2m² Coverage for Shower Floors & Bathroom Tiles with Primer, Hardener & Roller | DIY Anti-Slip Solution
GIF comparing soap sliding on untreated vs. Stellmann-coated floor, highlighting the safety of non-slip surfaces

One Invisible Coat Cuts Your Slip Risk by Up to 80%.

Top: Slippery Slope (Uncoated)

Bottom: Safe Slope (Stellmann Coated)

Get the Kit - Stop the Risk
Stellmann certified applicators installing clear non-slip coating on tiled kitchen floor for residential slip prevention and safety compliance

Want It Installed by a Certified Pro?

Not confident applying it yourself? Let a certified Stellmann installer handle it. Fast, fully guaranteed, and risk-free.

  • Install Quality Guarantee
  • Installer within 7 Days
  • Fully Certified Installers
  • Free Inspection and Quote

* Terms & Conditions apply

Get My Floor Installed by a Professional

Reviewed & Trusted

Why Stellmann Coatings?

EU-Engineered Quality
EU-Engineered Quality
DIY Friendly — No Tradie Needed
DIY Friendly — No Tradie Needed
UV Resistant — Won’t Yellow or Break Down
UV Resistant — Won’t Yellow or Break Down
CSIRO Certified for P3/P4/P5 Slip Ratings
CSIRO Certified for P3/P4/P5 Slip Ratings
Make my Home Safer Now
Visual comparison chart showing benefits of Stellmann Non-Slip Clear Pro over conventional treatments, highlighting safety, removability, and certified slip resistance

Why Risk Slips and Surface Damage? Choose the Coating That’s Built to Last.

Cheap “anti-slip” treatments etch, fade, and fail. Stellmann Non-Slip Coatings protect, preserve, and perform for years - backed by certification, warranty, and a slip resistance guarantee.

* Terms & Conditions apply

Add the Proven Coating to Your Cart

From Non-Compliant to Certified - In Just One Application

Make my Floor Safer
Before and after tile treatment using Stellmann Non-Slip Clear – transforming slippery P1-rated surface into certified P4 slip-resistant flooring

Shipping costs are calculated at time of checkout by our shopping cart, based on the weight of your order and the method of shipment.

  • Water-based
  • VOC-free coating
  • Non-hazardous product

Safety Data sheet available upon request.

FAQ

What sets Stellmann Non-Slip Clear apart from conventional anti-slip treatments?

Stellmann Non-Slip Clear stands out as a premium, water-based non-slip coating, offering a superior alternative to traditional anti-slip treatments. Unlike these treatments, which are an acid that etches into the surface, Stellmann’s approach prioritises safety without compromising the integrity of surfaces.

Where etching and acid treatments are corrosive and therefore lead to surface damage by creating micro-cracks, our non-slip coating creates a protective non-slip seal on top of the surface. Additionally, traditional treatments may discolour and stain surfaces. For this reason many anti-slip treatment providers will remain unclear or evasive about what their product really is and does.

Moreover, anti-slip treatments tend to underperform in wet conditions, posing ongoing safety concerns. In contrast, Stellmann Non-Slip Clear is certified by CSIRO with a range of slip-ratings conform the Australian Standard for Slip-Resistance, guaranteeing its efficacy and reliability.For those seeking a durable, functional, and certified non-slip solution, Stellmann Non-Slip Clear is the ideal choice.

* Terms & Conditions apply

What is Stellmann Non-Slip Clear?

Stellmann Non-Slip Clear is a premium-quality, transparent, dual-component polyurethane coating specifically engineered to eliminate the risk of slips and falls on a wide range of surfaces. It is formulated to address slipping risks in both wet and dry conditions, and this innovative solution offers various slip ratings to cater to different requirements, ensuring superior traction and peace of mind in any environment.

On which surfaces can I use Stellmann Non-Slip Clear?

Stellmann Non-Slip Clear is versatile and adheres exceptionally well to a wide range of surfaces. You can confidently apply our coating on various materials including tiles, ceramics, marble, terrazzo, natural stone, concrete, vinyl, fiberglass showers, and even metal and glass surfaces.

What sets our product apart is the non-etching formula, making it safe for use on delicate surfaces like marble, travertine, and bluestone without causing any damage to the surface.

For surfaces previously treated with solvent-based products or nano (non-stick) treatments, we recommend conducting an adhesion test prior to application. If you have any questions or uncertainties, feel free to reach out to us for guidance and support.

How do I apply Stellmann Non-Slip Clear?

Stellmann Non-Slip Clear is engineered for user-friendly applications, featuring an easy roll-on process. Follow these steps for optimal results:

  1. Prepare the Surface: Ensure the surface is clean and thoroughly dry before application.
  2. Apply Primer: Use the primer provided with our product. Apply a thin layer by sponge or microfibre mop. Allow Curing: Let the primer cure for approximately 30 minutes.
  3. Apply Stellmann Non-Slip Clear: Once the primer has cured, mix the two-components of our non-slip coating and apply a single layer evenly over the surface.

For comprehensive guidelines and instructional videos, visit our installation support page.